How to Create a Tour

Published: 2010-04-12


Last Updated: 2015-07-24

Applies To

  • Guard1 Plus versions: 2.06, 2.5x, 2.60, 2.7x, 2.8x, 3.x
  • Guard1 Plus SE versions: 4.12, 4.20, 4.30, 4.40, 5.x



When a location button is added to Guard1 Plus, it is considered unassociated until you add the location button to a Client or tour.  In order to view the download data in an Officer, Location, Incident or Rule Based report, location buttons must be added to a tour.

More Information

You must add your Location buttons to a Client to see their data in reports. First you will add a Client.

  1. From Guard1 Plus open the Facilities tab.
  2. Double-click Clients to start the Add New Client Wizard.
  3. Enter the Client information and click Next.
  4. Select "Go to the Finish screen" and click Next, then Finish.


Now you can add these unassociated locations to this new Client.

  1. From Guard1 Plus open the Facilities tab.
  2. Select this client that you just created and right-click , and click Add Location.
  3. Select all of the Location buttons that you want to this Client and click Next, then Finish.
  4. To learn how to run an Officer, Location and Incident Report, click here.