Last Updated: 2010-07-26
- Guard1 Plus SE versions: 4.12, 4.20, 4.30, 4.40
- Guard1 Plus versions: 3.x
When converting a Guard1 Plus 3.x database for use with Guard1 Plus SE using the G1ConversionWizard you receive the following error:
- Could not find stored procedure 'master..xp_rc4_decrypt'
Guard1 Plus 3.x has never been activated on the PC where it is currently installed.
Start Guard1 Plus 3.x and activate the software, then run the G1ConversionWizard again to convert your version 3.x database.