1-216-595-0695 Sales 
Wearable Panic Buttons for Behavioral Healthcare
Protect your staff and visitors.
Protect your staff and visitors with the Guard1 Duress System. Our personal protection devices (PPD) give your team emergency signaling with real time monitoring and location.
How It Works
- Your staff wears the Duress Pendant.
- Duress Pendant sends a signal once per second.
- Press the panic button to signal an emergency.
- The system responds immediately.
- Location is shown on a supervisor's monitor.
Know where staff and visitors are
The Duress Device transmits a signal once a second, so the Guard1 Tracking system knows where it is at all times.
6 different personal alarm alerts
The Duress Device will signal for 6 different conditions so that even if your staff is knocked to the ground or not moving and unable to press the button, The Duress Device will signal and let you know your staff member's location.
Respond instantly.
Guard1 supports alarms and signaling devices, including our Tower Light.
Track zone based locations
Guard1 is a zone-based location system. It identifies the zone where an alert occurs - a housing area, corridor, meeting room - any zone you set-up within your facility. Each zone has one or more Guard1 receivers. For additional location information, we offer the Precision Location tag.
Duress Alerts for these conditions
Timing and grace periods for these alerts are configurable, and secondary alerts can be disabled if desired.
Man down (device is in a tilt or horizontal position)
Panic alert when button is pressed
Low battery
No motion
Detached from holster
Not seen alert (no transmissions received)
The Duress Pendant
Real time
The Duress Device transmits a signal once per second, so your Guard1 system always knows its location.
Simple
Press the red button to signal an emergency.
Mobile
The Duress Device can be carried in a belt holster and the Pendant can be worn on a lanyard around the neck.
Reliable
The Duress Pendant comes with replaceable batteries and an average 12 month battery life.
Duress Pendant: Technical Specs
Part Number
G1-DURESS-12P-L - Duress Device 12 Pendant w/ 38" Lanyard G1-DURESS-12P-C - Duress Device 12 Pendant w/ CLIPM
Mechanical
G1-DURESS-CLIPM - Clip for Duress Device w/ Magnet G1-DURESS-CLIP - Clip for Duress Device w/o Magnet G1-DURESS-LANL - 36" Lanyard for Duress Device G1-DURESS-LANS - 6" Lanyard for Duress Device BAT-CR2450 - CR2450 Coin-cell Battery
Electrical
RF Transmission Frequency - 2.4 GHz Transmission Rate - Once per second Battery Type - 1 x CR2450 Battery Life - Approximately 12 months
Environmental
Operating Temperature - -40 Degrees to 158 Degrees F (-40 to 70 degrees C)
Frequently Asked Questions
What our Customers Say About Guard1
HEALTHCARE
281,411 sq ft
"Guard1 was the best solution we found to fit our purpose for security checks."
Antone Volinski
Security Leader
Peconic Landing